![]() Set to following anything and no other MiniME ™ can follow MiniME ™ 1. For example, if MiniME ™ 1 is following MiniME ™ 2, MiniME ™ 2 cannot be You must turn the MultiScreen off to be able to set the follows for the MiniME ™.On the following ME or MiniME ™ the chroma key will not be initialized properly for that source. The following ME or MiniME ™ get the same chroma key parameters as the leading ME or MiniME ™. Chroma Key initialization is only performed on the leading ME or MiniME ™.But getting a monitoring feed in real time with audio was a challenge, especially when we. I’m able to control the video router (Blackmagic VideoHub), video switcher (Ross Carbonite), recording equipment (AJA KiPros), and of course OBS. Memories and resets are also performed on the following ME or MiniME ™. With the private VPN, I have Companion 2.0 running on my laptop with a Streamdeck XL as a control surface.There must be available resources for the following ME or MiniME ™.You cannot have a MiniME ™ follow an ME.Keep the following in mind when working with ME Follows: With the substitution table you can have it that when camera 1 is selected on ME 1 the follow will select camera 1 on ME 2 but the substitution table substitutes camera 4 for camera 1 on ME 2. When a source is selected on ME 1, the same source is For example, you can have ME 2 follow ME 1 to simultaneous produce multiple feeds. TheĪnalog inputs are not supported in a 1080p 29.97Hz mode.Tip: The ME follows can also be used with the substitution table feature to create multilingual production feeds. ![]() In a 1080p 25/29.97Hz mode, the HDMI inputs on the Carbonite MultiMedia switcher only support 1080p 59.94Hz, 1080p 29.97Hz, and 1080p 25Hz.The 1080p 59.94Hz inputs are converted by dropping half the frames and may result in lower quality In a 1080p 25/29.97Hz mode, the Carbonite MultiMedia and Carbonite+ switchers support synchronized and.Switchers do not support the use of a color background as a source on a DVE or chroma key. In a 3G, 1080p 25/29.97Hz, or 2.5 ME mode, the Carbonite and Carbonite eXtreme.This means any 3 inputs on BNCs 1-6, any 3 on BNCs 7-12, any 3 on BNCs 13-18, and so on. In a 3G mode, only 3 of every 6 dedicated FSFCs on the Carbonite MultiMedia and Carbonite+ switchers can be.The analog inputs are not supported in a 3G mode. In a 3G mode, the HDMI inputs on the Carbonite MultiMedia switcher only support 1080p.The 1080i inputs are converted using a simple line-doubler and may result in lower quality video. In a 3G mode, the Carbonite MultiMedia and Carbonite+ switchers support synchronized and unsynchronized 1080p and 1080i inputs.In a 3G mode, the Carbonite and Carbonite eXtreme switchers only accept synchronized. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |